Close
All Products
    Filters
    Preferences
    Search
    Manufacturer: memmert

    Incubator IF Forced convection PLUS TwinDISPLAY

    Memmert IF TwinDISPLAY Range: 110L, 160L, 260L, 450L, and 750L

    The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.

    The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

     

    FEATURES 

    Temperatue

    • Working temperature range: min. 10°C above ambient up to +80°C
    • Setting accuracy temperature: 0.1 °C
    • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit

     

    Control technology

    •          Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
    •          Contro COCKPIT : TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
    •          Temperature ramps programmable via AtmoCONTROL software
    •          Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
    •          Function SetpointWAIT: the process time does not start until the set temperature is reached
    •          Calibration: three freely selectable temperature values
    •          Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

     

    Ventilation

    •          Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
    •          Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
    •          Vent: vent connection with restrictor flap

     

    Communication

    •          Documentation: programme stored in case of power failure
    •          Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

     

    Safety

    •          Temperature control: adjustable electronic over temperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
    •          Autodiagnostic system: for fault analysis

     

    Standard equipment

    •          Door: fully insulated stainless steel door with 2-point locking (compression door lock)
    •          Internals: 2 stainless steel grids, electropolished.
    •          Works calibration certificate: incl. works calibration certificate for +37°C
    •          Door: inner glass door

     

    Stainless steel interior

    •          Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

    The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.

    The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

     

    FEATURES 

    Temperatue

    • Working temperature range: min. 10°C above ambient up to +80°C
    • Setting accuracy temperature: 0.1 °C
    • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit

     

    Control technology

    •          Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
    •          Contro COCKPIT : TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
    •          Temperature ramps programmable via AtmoCONTROL software
    •          Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
    •          Function SetpointWAIT: the process time does not start until the set temperature is reached
    •          Calibration: three freely selectable temperature values
    •          Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

     

    Ventilation

    •          Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
    •          Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
    •          Vent: vent connection with restrictor flap

     

    Communication

    •          Documentation: programme stored in case of power failure
    •          Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

     

    Safety

    •          Temperature control: adjustable electronic over temperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
    •          Autodiagnostic system: for fault analysis

     

    Standard equipment

    •          Door: fully insulated stainless steel door with 2-point locking (compression door lock)
    •          Internals: 2 stainless steel grids, electropolished.
    •          Works calibration certificate: incl. works calibration certificate for +37°C
    •          Door: inner glass door

     

    Stainless steel interior

    •          Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

    *
    *
    *
    Product Files
    IF110Plus Fan forced incubator with twin display
    Incubator IF 110l Forced convection PLUS TwinDISPLAY
    SKU: MMTIF110PLUS
    IF110Plus Fan forced incubator with twin display
    Incubator IF 160l Forced convection PLUS TwinDISPLAY
    SKU: MMTIF160PLUS
    IF110Plus Fan forced incubator with twin display
    Incubator IF 260l Forced convection PLUS TwinDISPLAY
    SKU: MMTIF260PLUS
    IF110Plus Fan forced incubator with twin display
    Incubator IF 450l Forced convection PLUS TwinDISPLAY
    SKU: MMTIF450PLUS
    IF110Plus Fan forced incubator with twin display
    Incubator IF 750l Forced convection PLUS TwinDISPLAY
    SKU: MMTIF750PLUS
    ;