Close
All Products
    Filters
    Preferences
    Search
    Manufacturer: memmert

    Incubator IF Forced Convection

    Range: 55L, 110L, 160L, 260L and 460L

     Incubator IF Forced Convection

    Range: 55L, 110L, 160L, 260L and 460L

     

    The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.

    The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

     

    FEATURES 

    Temperatue

    • Working temperature range: min. 10°C above ambient up to +80°C
    • Setting accuracy temperature: 0.1 °C
    • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit

     

    Control technology

    •          Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
    •          Contro COCKPIT : SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
    •          Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
    •          Function SetpointWAIT: the process time does not start until the set temperature is reached
    •          Calibration: three freely selectable temperature values
    •          Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

     

    Ventilation

    •          Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
    •          Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
    •          Vent: vent connection with restrictor flap

     

    Communication

    •          Documentation: programme stored in case of power failure
    •          Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

     

    Safety

    •          Temperature control: adjustable electronic over temperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
    •          Autodiagnostic system: for fault analysis

     

    Standard equipment

    •          Door: fully insulated stainless steel door with 2-point locking (compression door lock)
    •          Internals: 1 stainless steel grid(s), electropolished
    •          Works calibration certificate: incl. works calibration certificate for +37°C
    •          Door: inner glass door

     

    Stainless steel interior

    •          Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

     Incubator IF Forced Convection

    Range: 55L, 110L, 160L, 260L and 460L

     

    The incubator I is at home everywhere in the world of research, medicine, pharmaceutics and food analytics, as well as food chemistry.

    The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

     

    FEATURES 

    Temperatue

    • Working temperature range: min. 10°C above ambient up to +80°C
    • Setting accuracy temperature: 0.1 °C
    • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit

     

    Control technology

    •          Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
    •          Contro COCKPIT : SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
    •          Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
    •          Function SetpointWAIT: the process time does not start until the set temperature is reached
    •          Calibration: three freely selectable temperature values
    •          Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

     

    Ventilation

    •          Fan: forced air circulation by quiet air turbine, adjustable in 10 % steps
    •          Fresh air admixture: adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
    •          Vent: vent connection with restrictor flap

     

    Communication

    •          Documentation: programme stored in case of power failure
    •          Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

     

    Safety

    •          Temperature control: adjustable electronic over temperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
    •          Autodiagnostic system: for fault analysis

     

    Standard equipment

    •          Door: fully insulated stainless steel door with 2-point locking (compression door lock)
    •          Internals: 1 stainless steel grid(s), electropolished
    •          Works calibration certificate: incl. works calibration certificate for +37°C
    •          Door: inner glass door

     

    Stainless steel interior

    •          Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
    *
    *
    *
    *
    *
    Product Files
    Incubator IF 55L Forced convection
    SKU: MMTIF55
    Incubator IF 110l Forced convection
    SKU: MMTIF110
    Incubator IF 160L Forced convection
    SKU: MMTIF160
    Incubator IF 260l Forced convection
    SKU: MMTIF260
    Incubator IF 750L Forced convection
    SKU: MMTIF750
    Product tags

    Recently viewed products

     

    Incubator IF Forced Convection

    Range: 55L, 110L, 160L, 260L and 460L